AR-B1893CM6C User’s Guide
AR-B1893CM6C Celeron M inside
with DDR SO DIMM, 4 Port built in LAN, 1 Mini PCI, 1 CF
27
Figure 3 Advanced menu
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up
the computer. If it is set to Enable, BIOS will shorten or skip some check
items during POST.
Enabled
Enable quick POST
Disabled Normal
POST
Full Screen LOGO Show
This item allows you to enable or disable show full screen LOGO
.
The Choice: Enabled, Disabled.
APIC Mode
This item allows use Advanced Programmable Interrupt Controller
feature
.
The Choice: Enabled, Disabled.
Console Redirection
The BIOS redirects console output to COM 1 by default (9600, 8N1, no
handshake) until a bootloader program is run from the hard disk drive.
The Choice: Enabled, Disabled.
Baud Rate
This item allows you to setup the data transfer rate for the
console port.
The choice: 9600, 19200, 38400, 57600 and 115200
Agent After Boot
This item allows you to enable or disable the agent after
boot
.
The Choice: Enabled, Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical
drive B to logical drive A & vice Versa.
The Choice: Enabled, Disabled.
USB Keyboard Support
