~
Page 47 ~
MEMORY ADDRESS ERROR:
While the memory address error revealed, trace the error location with the memory map in system and
replace the bad memory chips.
MEMORY SIZE HAS CHANGED:
Memory has been added or removed since the last boot. In EISA mode, re-configure the memory
configuration by using Configuration Utility. While in ISA mode, enter Setup and enter the new memory size
in the memory fields.
MEMORY VERIFYING ERROR:
It indicates an error verifying value has been written to memory. Use the location along with system's
memory map to locate the bad chip.
OFFENDING ADDRESS MISSING:
This is related to the I/O CHANNEL CHECK and RAM PARITY ERROR when the segment cannot be
isolated.
REBOOT ERROR:
When error occurs, press any key to reboot the system.
SYSTEM HALTED:
This message indicates the present boot has failed. Press and hold down Ctrl, Alt and Del simultaneously to
reboot the system.
Note:
If the content in Setting is inconsistent with CD-ROM, please refer to the Setting as priority.
