AR-B1665 User’s Guide
2.3 INSTALLING THE MEMORY (DIMM)
The AR-B1665 Embedded Board supports one 168-pin DIMM socket for a maximum total memory of 512MB in
SDRAM type. The memory module capacities supported are 64MB, 128MB, 256MB, and 512MB.
Installing and Removing DIMMs
To install the DIMM, locate the memory slot on the Embedded Board and perform the following steps:
Hold the DIMM so that the two keys of the DIMM align with those on the memory slot.
Gently push the DIMM in an upright position until the clips of the slot close to hold the DIMM in place when the
DIMM touches the bottom of the slot.
To remove the DIMM, press the clips with both hands.
Lock
DIMM
Lock
Lock
Lock
Top View of DIMM Socket
2.4 BATTERY JUMPER (SJ2)
1
2
3
1-2: ON-BOARD BATTERY (Factory Preset)
2-3: CLEAR CMOS
Factory Preset
9
