Acrosser Technology AND-DNV3N2 Series, User Manual, Page: 30 / 44

AND-DNV3N2
30 Acrosser Technology Co., Ltd.
• LAN Bypass Status LED
Configure LAN Bypass Status LED.
• Mode for Power-on
Configure LAN kit behavior when system in power-on state. (Bypass/Pass Through)
• Mode for Power-off
Configure LAN kit behavior when system in power-off state. (Bypass/Pass Through)
• WDT Configuration
Configure LAN kit behavior when WDT is triggered. (Bypass/Pass Through)
3.2.8. Advanced Setup: Power Management
Version 2.19.1266. Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced
Power Management
Power Mode
Restore AC Power Loss
Wake Events
RTC wake system from S5
Select system power mode.
[ATX Type]
[Always Off]
[Disabled]
• Power Mode
Select power supply mode.
• Restore AC Power Loss
Select power state when power is re-applied after a power failure.
• RTC wake system from S5
Fixed Time : System will wake on the hr :: min :: sec
Specified Dynamic Time : System will wake on the current time + Increase
minutes(s).