AND-APL1N1FL-XX Series User Manual
52
Acrosser Technology Co., Ltd.
5. Software Installation and
Programming Guide
5.1. Introduction
5.1.1.
Environment
This test utility develop based on kernel 4.4 or above (Ubuntu 18.04 Desktop 64bit)
and Window 10 iot 64bit.
5.1.2. GPIO
The AND-APL1N1 provides GPIO interface. Users can use the GPIO APIs to control
GPO Pin.
5.1.3.
Watchdog
The AND-APL1N1 provides a Watchdog Timer. Users can use the Watchdog APIs to
configure and to access the Watchdog timer. The Watchdog timer can be set to 1~255
seconds. Setting the timer to zero disables the timer. The remaining seconds of the
timer to reboot can be read from the timer.
5.1.4. LAN Bypass Subsystem
Three pairs of LAN ports on AND-APL1N1 implement the bypass function. Users can
invoke the LAN Bypass APIs to control the bypass states of the LAN ports.
1. Get bypass firmware version.
2. Set bypass wdt.
3. Set bypass wdt action.
4. Get bypass wdt action.
5. Set bypass power on action.
6. Get bypass power on action.
7. Set bypass power off action.
8. Get bypass power off action.
9. Set bypass current action.
10. Get bypass current action.
