AR-B1462 User
¡¦
s Guide
5-6
(4) DOS Driver
Step 1:
Make the new created directory to put the audio drivers.
C:\>MD AUDOS
Step 2:
Insert the Utility Disk #1 in the floppy disk drive, and then copy the compress file —DOSDRV.ZIP,
and the extract program —PKUNZIP.EXE, in the new created directory.
C:\>COPY A:\AUDIO\
DOSDRV.ZIP
C:\AUDOS
C:\>COPY A:\PKUNZIP.EXE C:\AUDOS
Step 3:
Change directory to the new created directory, and extract the compress file.
C:\>CD AUDOS
C:\AUDOS>PKUNZIP -d DOSDRV
.ZIP
Step 4:
In the DOS mode execute the SETUP.EXE file.
C:\AUDOS>ESS
Step 5:
The screen shows the hardware configuration items for setup the base address, IRQ, DMA …etc. If
these items setting all are correct. The setup will ask the directory to install the files. The default
directory is C:\AUDIODRV, and then press the [ENTER] key the installation is completed.
5.2.3 Network & SSD Utility
The first diskette provides two functions for user application. The file list is as follow:
UM9008
ZIP
PKUNZIP
EXE
README
DOC
The third diskette also provides SSD functions drivers. The file list is as follow:
SSD
<DIR>
WD1462
EXE
WP1462
EXE
RFG
EXE
RFGDEMO PGF
(1) Network Utility
1. Use PKUNZIP.EXE program to decompress the file in the DOS mode, and use the command to decompress.
The decompressing active is as follow:
For Example
C:\>MD NET
C:\>CD NET
C:\NET>COPY A:\PKUNZIP.EXE C:\NET
C:\NET>COPY A:\UM9008.ZIP C:\NET
C:\NET>PKUNZIP -D UM9008.ZIP
2. And then enter the operation system, as the installation steps process. Please refer to the decompressed file.
There is the README file in every sub-directory, and has detail description for using the drivers.
