Acroprint ARES IV, User Manual, Page: 17 / 39

How to add a new data item; one by one (recommended procedure for beginners):
1. Select the Assignments Tab.
2. Press
the “NEW” button located in the button bar.
3. Read/Touch with your P6000 Cradle, the iButton you want to assign. At this point in time do not read / touch any of the Booklet iButtons. See illus-
tration above. To assure good contact insert the iButton into the P6000 cradle, slide forward and hold for 2 seconds.
4. In the window “Name”, key in the Recording Station name, Watchman name, Supervisor name, Vehicle Registration Tag number or the name and/or
number of whatever person or element/site you want controlled.
5. In the window “Type”, select through the drop list, the type (group) to which the iButton belongs. These types or groups can be: Recording Station,
Supervisor, Watchman, Vehicle, Etc. Press the Add Type Button or Right click your mouse on top of the “Type” window to “EDIT/ADD additional
types (groups or categories).
6. (Only for Recording Stations): In the window “Area”, select through the drop list, the Tour Area to where you want the station assigned. Press the
Add Area Button or Right click your mouse on top of the “Area” window to “EDIT/ADD additional Areas.
7. (Only for Recording Stations): Press the STATION SCHEDULE button. You will be able to schedule the station’s recordings per each day of the
week, per each hour of the day (amount of times per hour you want this station visited). Press the Edit button, select the amount of recordings per
hour on the drop list (arrow) and click on each cell. To select the same rate of recordings per hour for all hours of the day press the Set All button.
8. Once this procedure is effected you can proceed to install (mount) your recording stations.
How to add new data items; all iButtons at Once (recommended procedure for experienced users)
17