Deployment
36
Copyright © Acronis, Inc., 2000-2006
Chapter 5.
Deployment
5.1
Managing deployment
With Acronis Snap Deploy Management Console, you can remotely manage
simultaneous deployment of master image on target PCs.
Some steps of the deployment procedure may differ from those described below,
depending on the operating system.
To prepare for deployment
1.
Boot the target PCs from bootable media or PXE.
2.
Click on Manage deployment item in the Acronis Snap Deploy
Management Console main window.
3.
Connect to the computer with Acronis OS Deploy Server installed.
5.1.1 Selecting
target
computers
In the central part of the Management Console window, you will see the IP
addresses of target PCs.
Click Deploy on target PCs in the Tasks sidebar to launch the Deploy
Image wizard, then click Next.
Figure 23. Deployment tab
In the Target Computers Selection window, check the IP addresses of
target PCs. You can select all target computers by checking All clients. Then,
click Next.
Summary of Contents for SNAP DEPLOY -
Page 1: ......
