ACRONIS BACKUP RECOVERY 10 WORKSTATION Installation Manual Download Page 6

6

 

Copyright © Acronis, Inc., 2000-2009 

 

 

1.4.

 

License policy 

Acronis Backup & Recovery 10 licensing is based on the number of machines managed and protected 
by the product. Acronis Backup & Recovery 10 agents require a license to perform operations on each 
managed machine. 

Acronis Backup & Recovery 10 Server for Windows (ABR10 SW)

 

Acronis Backup & Recovery 10 Workstation (ABR10 W)

 

The license key for the appropriate Acronis Backup & Recovery 10 edition is required to install an 
agent delivered with any of these editions. The license key has to be entered during the agent 
installation. 

Reassigning licenses 

If a managed machine is taken out of service permanently and replaced, or the machine's network 
card is replaced (which normally results in changing the MAC address), you can remove the 
corresponding license from Acronis License Server and then add it anew to a  pool of available 
licenses. 

According to Acronis End User License Agreement: 

You may reassign a Software License if you retire the licensed Hardware due to permanent Hardware 
failure.  If you reassign a Software License, the Hardware to which you reassign the license becomes 
the new licensed Hardware for that particular Software License. 

 

1.5.

 

Local installation (Windows) 

You have a choice between downloading a full installation package and a small executable package 
that will download from Acronis Web site, only those components that you select to install. 

 

1.5.1.

 

Preparation 

Acronis Backup & Recovery 10 uses TCP port 9876 for local installation and for communication 
between components. The setup program automatically opens this port through Windows Firewall. If 
you use a different firewall, make sure that the port is open for both incoming and outgoing requests 
through that firewall. 

 

1.5.2.

 

Installation procedure 

Do the following to install Acronis Backup & Recovery 10: 

1.

 

Run the Acronis Backup & Recovery 10 setup file. 

2.

 

Click 

Install Acronis Backup & Recovery 10

3.

 

Type your license key. 

4.

 

Select the components and specify the component features that you want to install. 

Summary of Contents for BACKUP RECOVERY 10 WORKSTATION














Reviews: