Y1-03-0128 Rev. E
k. Press the CHANNEL
t
key to tune unit to any channel (except Channel 16).
l. Set the monitoring transceiver to the same frequency. (See Table 4.1 for operating
frequencies.)
m. Listen for any activity.
n. If no activity is detected, transmit the test message and have someone monitor the
transmission (see above for suggested test message formats.)
o. If the test signal was not heard (full quieting), have the unit inspected at your nearest
authorized service center.
p. Have someone return the call from the monitoring station (lowest power setting) to
verify proper radiotelephone receiver operation.
q. If a response is not heard (full quieting), have the radio unit inspected at your nearest
authorized service center.
r. Slide ON/OFF switch to “OFF” position.
s. Replace control panel protective cover.
t. Replace unit into its survival craft package.
5.3
VISUAL INSPECTION .3 VISUAL INSPECTION
5.3.1 Periodically inspect the Survival Radio for damage, cracks and front panel label wear.
Wipe off any salt deposits with a damp cloth.
