manualshive.com logo in svg

ACR Electronics ResQLink AIS, User Manual

The ACR Electronics ResQLink AIS is a high-quality safety device designed for an enhanced rescue experience. Ensure complete understanding and efficient usage of this product by downloading the free User Manual from manualshive.com. This comprehensive manual provides step-by-step instructions and important information, enabling you to make the most of your ResQLink AIS.

Share
Download
background image

USER MANUAL

8 

912S-03765-01.00 12/11/2022

1.8 

Spares and Accessories

1.*

9649

Floatation Pouch

2.

9646

Fittings Kit

*  

The floatation pouch is supplied permanently attached to units sold in Australia and 

 

New Zealand to comply with local regulation

1.9 

NFC and Mobile App.

The ResQLink AIS is capable of connection to devices using Near Field Communication. NFC tech-

nology allows communication between two electronic devices over a distance of 4cm (1.5”) or less. 

The benefit of using NFC in the ResQLink AIS is that the power used for communication comes from 

the mobile device and not the beacon.

The ACR Electronics mobile App. allow a user to access the ResQLink AIS and see the programmed 

details and the latest test results giving a clear indication of the beacons condition. 

Download the App. here:  Android 

 

 

iOS 

To use the App. touch your mobile device to the front of the ResQLink AIS where you see “NFC”.

 

Summary of Contents for ResQLink AIS





























Reviews:

No comments

Related manuals for ResQLink AIS

Brands by name

Popular brands

Load more brands