manualshive.com logo in svg

ACR Electronics GLOBALWATCH UAIS - QUICK, User Manual

Share
Download
ACR Electronics GLOBALWATCH UAIS - QUICK User Manual Download Page 58

 

 

 

GlobalWatch™ UAIS User Manual  

54 

Version 1.0 

 

b)  User Password Settings 

 

 

 

 
Change User Password Protection

:

 

 
This function allows the user to enable or disable the User Password Query Function. For security reasons, it 
is highly recommended to enable User Password Protection in order to avoid unauthorized Transponder 
operation. 
After the settings have been input and saved, the Data Saved Screen confirms the new configuration.

 

 

 

 
 

Dynamic Keys: Change User Password Protection

 

[M5]    

[Save] 

 

Save User Password 
Setting 

[Enter] 

Save User Password 
Setting 

[M6]    

[Change]

 

Configure Password 
Setting (on/off) 

[Right] / 
[Left] 

Configure Password 
Setting (on/off) 

[M8]   

[Back] 

Return to Submenu 
User Password 
Settings 

 

 

 

N 1^24' E  0^18' |1>0.10|2>1.30|3>1.80nm

     |---------------------------------- 

     | 6-2. User Password Settings       

-----| |                                 

     | +- 1. Change User Password        

View | +- 2. Change Password Protection  

     |                                   

-----|                                   

     |                                   

Msg. |                                   

     |                                   

-----|                                   

     |                                   

Displ|                                   

---------------------------------------- 

NUM| Select->|         |         |<-Back

 

N 1^19' E  0^12' |1>0.10|2>1.30|3>1.80nm

****** Change Password Protection ****** 

                                         

                           on/off        

User password protection: [*]/[ ]        

                                         

Note: It is highly recommended that you  

enable user password protection.         

                                         

                                         

                                         

                                         

                                         

                                         

---------------------------------------- 

   |  Save  | Change  |         | Back  

 

Y1-03-0178A

Summary of Contents for GLOBALWATCH UAIS - QUICK












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands