manualshive.com logo in svg

ACR Electronics GLOBAL FIX - REV G, Product Support Manual, Page: 20 / 22

Share
Download
ACR Electronics GLOBAL FIX - REV G Product Support Manual Download Page 20

 

 Y1-03-0157-2 Rev. G 

17

ACR Electronics, Inc. 

5757 Ravenswood Road, Ft. Lauderdale, FL 33312-6645 
Tel: +1 (954) 981 3333  Fax: +1 (954) 983-5087  

www.acrelectronics.com 

 

European Office 

1 Rose Cottages, Pitmore Lane, Sway, 
Lymington, Hampshire SO41 6BX UK 
Tel: +44-1590-682282 Fax: +44-1590-683828 
Email: [email protected] 

 
 
 

INTERNATIONAL MARITIME ORGANIZATION 
SHORE BASED MAINTENANCE 

 
The Maritime Safety Committee approved guidelines for shore-based maintenance (SBM) of satellite EPIRBs, for the 
purpose of establishing standardized procedures and minimum levels of service for the testing and maintenance of 
satellite EPIRBs to ensure maximum reliability whilst minimizing the risk of false distress alerts. 
 
Ref. T2/6.01 
MSC/Circ.1039 
 

Products:  

406 MHz (COSPAS-SARSAT) Emergency Position-Indicating Radio Beacons (EPIRBs): 

•

  ACR Satellite 406™ RLB-27/28 (Cat. 1 & Cat. 2) 

•

 ACR Satellite

2 

406™ RLB-32 (Cat. 1 & Cat. 2) 

•

  ACR RapidFix™ RLB-33 (Cat. 1 & Cat. 2) 

•

  ACR GlobalFix™ RLB-35 (Cat. 1 & Cat. 2) 

•

  ACR Float Free 406 Memory Capsule RLB-35MC (Cat. 1) 

 

Maintenance  

406 MHz satellite EPIRBs should be inspected and tested annually in accordance with 

Service Interval:

 

  MSC/Circ.1040. Shore-based maintenance of all satellite EPIRBs should be carried out 

by the flag administration and not exceeding 5 years. It is recommended that 
maintenance be performed at the time when the battery is to be changed. 

 
 

  All ACR 406 MHz EPIRBs shall have their first shore-based maintenance performed on 

the same dates as their battery replacement. 

 

 
SBM Providers: 

 

ACR only authorizes battery replacements and shore based maintenance to be 
performed by certified ACR service providers.  

 

Manufacturer:  

ACR Electronics Inc., Fort Lauderdale, Florida USA 

 
 
 
Signed on behalf of ACR Electronics Inc. 

 
 
 
                  Signed :

 _________________________________ 

 
   Name: 

John 

F. 

Flood 

 Title: 

V.P. 

Engineering 

 

 

 

 

Date:  September 27, 2006 

 

 

Summary of Contents for GLOBAL FIX - REV G























Reviews:

No comments