manualshive.com logo in svg

ACR Electronics AISLink CB2, User Manual

Share
Download
ACR Electronics AISLink CB2 User Manual Download Page 24

CB2 Manual

 912S-02858-01.12 

24

PGN

Title

129038

AIS Class A position report

129039

AIS Class B position report

129040

AIS Class B extended position report

129041

AIS Aids to Navigation (AtoN) report

129539

GNSS DOP‘s

129540

GNSS sat’s in /view

129545

GNSS RAIM Output

129792

AIS DGNSS broadcast binary message

129793

AIS UTC and date report

129794

AIS Class A static and voyage related data

129795

AIS addressed binary message

129796

AIS acknowledge

129797

AIS binary broadcast message

129798

AIS SAR Aircraft Position

129800

AIS UTC/Date Inquiry

129801

AIS addressed safety related broadcast message

129802

AIS safety related broadcast message

129803

AIS interrogation

129804

AIS assignment mode command

129805

AIS data link management message

129807

AIS group assignment

129809

AIS Class B ‘CS’ static data report part A

129810

AIS Class B ‘CS’ static data report part B

7.3  WiFi Output

During normal operation all data being received on either NMEA0183 port will be output 

via the WiFi signal and be available to any device connected. Multiple WiFi devices may be 

connected to display this data.

Note: If both NMEA0183 ports are set to 4800 or GPS only then GPS data only will be 

available on the WiFi output.

Summary of Contents for AISLink CB2





























Reviews:

No comments

Brands by name

Popular brands

Load more brands