©2020 ACP, Inc.
Cedar Rapids, IA 52404
Part No. 20001409
Original Instructions
ممن
3
مةحفصلا
Page 3 of 4
Quick Start Guide
Refer to Owner’s Manual for Safety Statements. Complete Owner’s Manual available online.
This document covers RC* and MRC* models
OVEN CLEARANCES
A. Allow at least 2" )5.1 cm( of clearance
around top of oven. Proper air
flow around oven cools electrical
components. With restricted air flow,
oven may not operate properly and life
of electrical parts is reduced.
B. There is not an installation clearance
requirement for the back of the oven.
C. Allow at least 1” )2.54 cm( of clearance
around sides of oven.
D. Install oven so oven bottom is at least
3 feet )91.5 cm( above floor.
So…how do I use it?
Manual Cooking
Allows operator to heat without changing the preset recipe keypads.
From READY or DOOR OPEN screen:
1.
Open oven door, place food in oven, and close door.
2. Press MENU )
☰
( keypad. MENU screen will display.*
3. Press number "2" keypad to access "Manual Cook".
4.
To navigate to editable fields:
Press UP/DOWN
)▲▼( keypads. Active field will
be highlighted in red. Editable fields include: Cook Time; % Microwave Power Level
)0-100% in 10% increments(; and Add a Stage.
5.
Press number keypads to enter desired settings per field.
6.
To add additional cooking stages:
Press DOWN
)▼( keypad until “
+ STAGE” is
highlighted. Repeat steps 4-6.
7. Press START/OK keypad to begin cooking.
8.
At the end of the cooking cycle, the oven beeps. Carefully remove food from oven.
Edit or Create New Recipes
Allows the operator to edit or create new preset recipes for customized
cooking.
1. Press MENU )
☰
( keypad. MENU screen will display.*
2. Press number "1" keypad to access "Edit Recipe".
3. Press number keypad)s( to open the desired recipe/folder location.
4.
To navigate to editable fields:
Press UP/DOWN
)▲▼( keypads. Active field will be
highlighted in red. Editable fields include: Recipe Name; Cook Time; % Microwave
Power Level )0-100% in 10% increments(; and Add a Stage.
5.
Press number keypads to enter desired settings per field.
6.
To add additional cooking stages:
Press DOWN
)▼( keypad until “
+ STAGE” is
highlighted. Repeat steps 4-6.
7.
To save and exit:
Press START/OK keypad.
8.
To discard changes
: Press STOP/RESET keypad.
Preset Recipe Keypads
To heat using a preset recipe.
From READY or DOOR OPEN screen:
1.
Open oven door, place food in oven,
and close oven door.
• To add additional servings press
QUANTITY )+( keypad.
2. Press desired number keypad)s(.
3. Oven operates and time counts down.
4.
At the end of the cooking cycle, the
oven beeps. Carefully remove food
from oven.
CONTROL PANEL FEATURES
)A(
USB Port
)B(
Display
)C(
UP keypad
)D(
DOWN keypad
)E(
QUANTITY keypad
)F(
MENU keypad
)G(
Number keypads
)H(
STOP/RESET keypad
)I(
START/OK keypad
MENU SCREENS
Page 1
)1(
Edit Recipe
)2(
Manual Cook
)3(
Date/Time
)4(
User Options
)5(
Load File
Page 2
)1(
Service Mode
*Note: If PIN Code is enabled, your unique 4 digit pin code will be required to access Menu Screen
(D)
(I)
(F)
(G)
(H)
(B)
(C)
(E)
(A)
A
D
B
C
A
D
B
C
INDIVIDUAL OVEN
)All models(
STACKING OVENS
)1700-2200 watt models
only
(
