ACP OMNICYCLE ELITE User Manual Download Page 35

Page: 35 / 48

OMNICYCLE

ELITE USER MANUAL

TECHNICAL SPECIFICATIONS

GENERAL:

Basic Omnicycle

Elite with upper extremity

Length:

29 - 35 inches

Width:

18 inches

Exerciser

Height:

45.5 – 50 inches

Weight:

90.4 pounds

Crank Length

Fixed:

Variable:

3.0 inches / 4.3 inches

2.5 – 4.5 inches

Maximum Patient Weight Limit

265 lbs.

Patient Height Requirements

3’ 11” to 6’ 6”

Power Input

VAC

90 - 130

Power Supply Frequency

50 - 60

Speed Range

RPM

0 – 75

Speed Range Active Exercise

RPM

0 – 90

Torque Range

2 – 22

Fuse

2 X 1.6 AH 250V, slow

Noise Emission

Lpa :S 70

Medical Device Class

FDA

Class I Exempt

Protection Class

Degree of Protection

Type B

Protection Category

IP2X

Ambient conditions for operation

ºC

% Rh

hPa

5 to 40

15 to 90

700 to 1060

Ambient conditions for storage or transportation

ºC

% Rh

hPa

-25 to 70

15 to 93

700 to 1060

ACP reserves the right to change technical specifications and product availability without notice.

Electromagnetic Compatibility

The Omnicycle

Elite is delivered with a cardio pulse set manufactured by Polar

. This is the only pulse sensor that

is authorized for use with the Omnicycle

Elite.

The Omnicycle

Elite meets the requirements of IEC 60601, IEC 61000, and CISPR11

The Omnicycle

Elite is not compliant to EN 60601-1-11 for Home Care purposes.

For best operation, the user should maintain a safe distance between the Omnicycle

Elite and other devices that

transmit high frequency (i.e cellphones and wireless internet devices). A distance of thirty feet is recommended to
reduce the likelihood of interference.

For a more comprehensive understanding of the Omnicycle

Elite with respect to EMC testing results. Please

contact ACP Customer Support at (800) 350-1100. Ask for Document EMC-0100.

Summary of Contents for OMNICYCLE ELITE
















































Search results

Summary of Contents for OMNICYCLE ELITE

Reviews:

Related manuals for OMNICYCLE ELITE

Brands by name

Popular brands

ACP OMNICYCLE ELITE, User Manual

Search results

Summary of Contents for OMNICYCLE ELITE

Reviews:

Related manuals for OMNICYCLE ELITE

Brands by name

Popular brands