14
User Options
Changing User Options
There are several options you can change to customize the operation of the oven for your business. The table below shows
these options; the factory setting is shown in bold type.
1. Oven must be off. To turn oven off, press OFF button on Keypad.
2. Press and hold “2” keypad for three seconds.
3. Choose option by turning dial to highlight desired option. Press knob and the next option will be highlighted.
4. Press SAVE when finished.
CLEAN FILTER
When this message displays, clean the
air filter thoroughly.
Cleaning the air
filter will not shut off the message.
The message will automatically stop
displaying after 24 hours.
Depending on microwave use and
environmental conditions, the filter
may need to be cleaned more or
less frequently. Once the frequency
is determined, set the option for the
appropriate time frame.
Air filter and vents must be cleaned
regularly to prevent overheating of the
oven. Refer to Owner’s Manual for
complete cleaning instructions.
KEYPAD
Option #
Setting Name
Options
Single digit entry
1
Digit Entry
Double digit entry
1 Level
2 Levels
2
Menu Setting
3 Levels
Manual cooking allowed
3
Manual Lock
Manual cooking not allowed
Changes to programs allowed
4
Program Lock
Password needed
Opening door resets timer
5
Door Open
Opening door pauses cook cycle
Off
6
Keybeep
On
Low
Medium
7
Keybeep Volume
High
Continuous until door is opened
Three beeps once
8
End of Cycle Beep
Three beeps repeating
Off
30 Seconds
60 Seconds
9
Keyboard Window
120 Seconds
Off
10
Preheat Warnings
Warn if oven not at temp
Temperatures are displayed in ºF for 60 Hz models
11
Temperature Scale
Off
Displays every 7 days
Displays every 30 days
12
Clean Filter
Displays every 90 days
From Preheat, go to Ready
13
Auto Menu
From Preheat, go to Menu
No individual tube programming
14
Magnetron Control
Individual Tube Programming
No microwave only mode
15
Microwave Only Mode
Allow microwave only mode
Do not save after manual cook
16
Manual Program Save
Save after manual cook
2 Hours
4 Hours
8 Hours
17
Automatic Shut Off
Disable
Begin Transfer: Card to Oven
18
Data Transfer
Begin Transfer: Oven to Card
Temperatures are displayed in ºC for 50 Hz models
