ACP AMSO Series, Service Manual

Page: 19 / 32

Figure 2
16
DOOR & DOOR SWITCH ADJUSTMENT
1. Remove the outer case.
2. Using a pencil or pen, mark the position of both door hinge arms as shown in Figure 1.
3. While holding the door closed, carefully remove both door springs and open the door the full position.
4. While providing support to the open door remove the Hole Plugs and Shoulder Bolts using the 2mm Hex
Key Wrench as shown in Figure 2 and remove the Hinge Arms.
Figure 1
16400029
Revision 1
December 2015