User manual
19
ACOWA INSTRUMENTS, Industrivej 10, 8305 Samsø - VAT-no: 36562919
–
mail: [email protected]
–
Phone: +45 7221 7979
Device settings / advanced settings
To activate the Device settings, click on the following symbol:
This results in the following window.
Reports and alarms:
If the GEKKO is used as a stand-alone device that is not connected to a SCADA system via AcowaCore, it is
possible to receive a daily status SMS and alarm SMS in case of an alarms.
For daily status SMS, the following parameter must be used: "Daily status SMS in use" to activate the
function.
"Receivers Phone Number." There is only one user who can receive a status SMS.
"Time of day (in full hours)" you want a status SMS for example 9:00 pm. enter the value 9.
Alarms can be sent to 4 different recipients. You can use SMS or standard dial-up. You must enter a delay
between each alert in the list. For SMS, a typical delay of 60 sec. When using dial-up, it will typically be 300
seconds.
Reverse Comm (Rarely used):
Enter the IP address and TCP port of the server on which AcowaCore is installed. The GEKKO logger will
then be a TCP client and connect to the SCADA system via AcowaCore.
Summary of Contents for GEKKO
Page 1: ...User manual GEKKO ...
