1.2 Connecting the appliance
The technical specifications of your radiator are shown on the nameplate, which
is located on the side of the radiator towards the bottom. Please take note of
these before installing the appliance.
When connecting the appliance to the mains, you must ensure that:
_ voltage and power are as specified on the nameplate
_ standard colour coding is used (brown: live, blue or grey: neutral).
The flexible cable supplied with the appliance is designed to be connected to the
mains via a junction box that must be placed behind the appliance, with no need
for a plug. In a kitchen or bathroom, the junction box must be positioned at least
25 cm from the floor.
DUAL-ENERGY RADIATORS
You are advised to install a circuit breaker between your radiator and the
electricity supply to disconnect it from the power when it is used with your
central heating system.
1.3 Radiator installation restrictions
The appliance must be installed in accordance with standards in force and with
rules of good professional practice in the country of use.
The appliance must not be exposed to intense or prolonged humidity (e.g.
shower, pool, etc.).
29
IP: level of protection against ingress
of water
xxxV – xxxxW: voltage and power
required for installation
Appliance reference number
Class II: double insulated
OF: serial number
1 Installing the appliance
1.1 Positioning the appliance
To get the most out of your appliance and enjoy the highest standards of
comfort, we recommend that you:
- install the appliance near places of high heat loss (windows, doors, etc.)
wherever possible
- ensure that an area of about 50 cm in front of the appliance is clear of objects
which might hinder air circulation (furniture, chairs, etc.)
- ensure that the bottom of the appliance is positioned at least 15 cm from the
floor
- leave at least 10 cm between the top of the appliance and any shelf
- not place the heating appliance underneath a power outlet
- use mounting screws suitable for your wall.
IMPORTANT
This radiator should never be installed with the power supply unit
positioned topside.
28
E N
E N
Min. 15 cm
Min. 10 cm
Infrared receiver
