ACOUSTIC SOLUTIONS SP 101 Owner'S Manual Download Page 2

CAUTION: 

To  reduce  the  risk  of  electric  shock,  do  not  remove  any  cover. 

NO  USER-SERVICEABLE  PARTS  INSIDE,  REFER  ANY  SERVICING  TO 

QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

• Read and keep these instructions available for future reference.

• For indoor use only.

• The unit must only be connected to a suitable mains power supply using the    

   mains power lead provided.

• To reduce the risk of fire or electrical shock, do not expose this unit to rain 

   or moisture.

• The apparatus shall not be exposed to dripping or splashing. 

• No objects filled with liquids, such as vases, shall be placed on the 

  apparatus.

• Unplug the unit from the wall socket during lightning storms and when it is 

   not going to be used for a long period of time.

• Take care that foreign objects do not enter, or liquids are not spilled, into 

   the enclosure through any openings. If this should happen, refer to qualified 

   service personnel before attempting to use.

• Ensure adequate ventilation - do not cover this unit with curtains, etc.

• Do not install near any heat source, such as radiators, or other equipment 

   that produces heat.

• Protect the mains power cable from being damaged.

• The SP 101 system is double insulated and does not require an earth 

   connection in the UK mains plug.

UK MAINS PLUG DETAILS

For your convenience a mains plug with a fuse (3 Amp) has been fitted to 

this appliance. For your safety please observe the following information.

• The SP 101 is designed to operate on AC mains supply between 220 

   and 240 volts, 50 Hz.

• The wires in the mains lead are coloured in accordance with the 

   following code:

    

   BLUE                  - NEUTRAL 

   BROWN 

- LIVE

• Under no circumstances should the Neutral or Live wires be connected 

   to the ‘E’ (Earth) terminal.

CAUTION

RISK OF ELECTRIC SHOCK!

DO NOT OPEN!

SAFETY  INSTRUCTIONS

This product complies with 

European low voltage (73/23/

EEC) and electromagnetic 

compatibility (89/336/EEC) 

directives. 

The lightning flash symbol with the arrowhead within an equilateral triangle is 

intended to alert the user to the presence of uninsulated ‘dangerous voltage’ 

within  the  product’s  enclosure  that  may  be  sufficient  to  constitute  a  risk  of 

electric shock to persons

The exclamation point within an equilateral triangle is intended to alert the user 

to important operating and maintenance instructions in the service literature 

relevant to this appliance.

2

Summary of Contents for SP 101













Reviews: