background image

Page 2

CAUTION:

 To reduce the risk of electric shock, do not remove any cover. 

NO USER-SERVICEABLE PARTS INSIDE, REFER ANY SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

• Read and keep these instructions available for future reference.

• For indoor use only.

• The unit must only be connected to a suitable mains power supply using 

   the mains power lead provided.

• To reduce the risk of fire or electrical shock, do not expose this unit to rain 

   or moisture.

• The apparatus shall not be exposed to dripping or splashing. 

• No objects filled with liquids, such as vases, shall be placed on the 

  apparatus.

• 

Unplug the unit from the wall socket during lightning storms and when it is 

   not going to be used for a long period of time.

• Take care that foreign objects do not enter, or liquids are not spilled, into 

  the enclosure through any openings. If this should happen, refer to 

   qualified service personnel before attempting to use.

• Ensure adequate ventilation - do not cover this unit with curtains, etc.

• Do not install near any heat source, such as radiators, or other equipment 

   that produces heat.

• Protect the mains power cable from being damaged.

• The CAMP-1B system is double insulated and does not require an earth 

   connection in the UK mains plug.

UK MAINS PLUG DETAILS

For your convenience a mains plug with a fuse (3 Amp) has been fitted to 

this appliance. For your safety please observe the following information.

• The CAMP-1B is designed to operate on AC mains supply between 220 

   and 240 volts, 50 Hz.

• The wires in the mains lead are coloured in accordance with the 

   following code:

   BLUE                  - NEUTRAL 

   BROWN 

- LIVE

• 

Under no circumstances should the Neutral or Live wires be connected 

   to the ‘E’ (Earth) terminal.

CAUTION

RISK OF ELECTRIC SHOCK!

DO NOT OPEN!

SAFETY  INSTRUCTIONS

The lightning flash symbol with the arrowhead within an equilateral triangle is 

intended to alert the user to the presence of uninsulated ‘dangerous voltage’ 

within the product’s enclosure that may be sufficient to constitute a risk of 

electric shock to persons

The exclamation point within an equilateral triangle is intended to alert the 

user to important operating and maintenance instructions in the service lit-

erature relevant to this appliance.

This product complies with European low voltage (2006/95/EC) 

and electromagnetic compatibility (2004/108/EC) directives. 

WEEE marking

“Information for the consumer”

Disposal of your old product

Your product is designed and manufactured with high quality materials and components, 

which can be recycled and reused.

When this crossed out wheeled bin symbol is attached to a product it means the 

product is covered by the European Directive 2004/108/EC.

Please make yourself aware of the local collection system for electrical and 

electronic products.

Please act according to your local rules and do not dispose of your old products with 

your normal household waste. The correct disposal of your old product will help prevent 

potential negative consequences for the environment and human health.

Summary of Contents for CAMP-1B















Reviews: