Ngara
User Manual
Figure 29: Session Configuration
Indication of the start session command can be viewed through the logger’s status information group described in
Section 5.3.2.
5.9.2 Stopping a Session
The logger can be set to stop a session by navigating to the following menu item.
Session Control -> Stop
Figure 30: Stopping a Session
Indication of the stop session command can be viewed through the logger’s status information group described in
Section 5.3.2.
The internal buffers must be flushed before Ngara returns back to the standby state
5.9.3 Taking a Reference Level
Reference levels can be recorded to the log file by navigating to the following menu item
Session Control -> Take Reference
Version — 25-7cd7566
Page — 62 of 80
Summary of Contents for Ngara
Page 1: ...Ngara User Manual 25 7cd7566...
Page 77: ...Ngara User Manual Figure 47 10Hz to 1kHz Version 25 7cd7566 Page 77 of 80...
Page 78: ...Ngara User Manual Figure 48 10Hz to 10kHz Version 25 7cd7566 Page 78 of 80...
Page 79: ...Ngara User Manual Figure 49 1kHz to 10kHz Version 25 7cd7566 Page 79 of 80...
