Ngara
User Manual
1. Enter the loggers IP Address in the
IP Address
box
2. Press the
Link
Button
3. A password prompt will appear
4. Enter loggers remote password as previously set in Section 4.4.3.1
5. Connection will be established
To disconnect from a remote logger -
1. Press the
Disconnect
button, or simply lose the application
5.3.1 The Result Group
Through the results group it is possible to view all of the current results simultaneously.
Through the results group it is also possible to-
• Change current time weighting whilst in standby mode
• Enable maximum hold markers through the tick boxes provided
• Reset the maximum hold markers through the push button provided
The display is updated every
100
ms
5.3.2 The Status Group
General logger status messages can be viewed through the status group box.
The status group shows the following information-
• Current Logger State
• Current Session State
• Current Logger Operations
• Current Disk State
• Current Session Error
• Session Name
5.3.3 The General Information Group
The general information group displays current battery states along with date and time of logger, and current logger’s
serial number.
Version — 25-7cd7566
Page — 44 of 80
Summary of Contents for Ngara
Page 1: ...Ngara User Manual 25 7cd7566...
Page 77: ...Ngara User Manual Figure 47 10Hz to 1kHz Version 25 7cd7566 Page 77 of 80...
Page 78: ...Ngara User Manual Figure 48 10Hz to 10kHz Version 25 7cd7566 Page 78 of 80...
Page 79: ...Ngara User Manual Figure 49 1kHz to 10kHz Version 25 7cd7566 Page 79 of 80...
