Acoustic Energy AEG05/P5 Owner'S Manual Download Page 3

Important Safety

Instructions

To ensure your safety, please read these instructions before
operating this unit.

1.

Follow all instructions and observe warnings marked 
on the unit.

2.

Always use the correct line voltage. Please refer to page 6,
and find out the correct power requirements in your area.
Please note that different operating voltages may require
the use of different adapters.

3.

Do not install the unit in an unventilated rack, or directly
above heat producing equipment such as power amplifiers.

4.

To avoid shock or fire hazard, do not expose the unit to rain
or moisture, or operate it where it will be exposed to water.

5.

Do not attempt to operate the unit if it has been dropped,
damaged, exposed to liquids, or if it exhibits a distinct
change in performance indicating the need for service.

6.

Only qualified service personnel should open this unit.

8.

Removing covers will expose you to hazardous voltages.

9.

Do not overload wall outlet, extension cords or integral
convenience receptacles, as this can result in a risk of fire
or electrical shock.

10.

Route power supply cords so that they are not likely to be
walked on or pinched by items placed on or against them,
paying particular attention to cords at plugs, mains
adapters, and the point at which they exit from the unit.

2

Warning

To reduce the risk of fire or electric shock, do not expose this system
to rain or moisture.

Caution

To reduce the risk of shock, do not remove the cover of this system.
There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.

The 

CAUTION

marks shown on this page are located on the back of

your system.

The lightning flash, with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the system enclosure that may be of sufficient
magnitude to constitute a risk of  electric shock.

The exclamation point within an equilateral triangle as
marked on the system is intended to alert the user to
the presence of important operating and maintenance
instructions in this owner’s guide.

Summary of Contents for AEG05/P5

















Reviews: