Connections
Check that both your amplifier and subwoofer are switched off before connection.
Failure to do so may result in damage to your amplifier or subwoofer. It is
sometimes recommended that over-long low cost cables are used initially to
facilitate experimentation with the positioning, and only then purchase and install
using the final cable choice.
For use with amplifiers having a subwoofer output jack
Connect from the dedicated subwoofer line output on the amplifier to the line
input(s) on the AE108² (a single lead to either input or a ‘Y’ connector to both inputs
may be used).
For use with amplifiers having Line Level pre-amp jacks
The pre-amp outputs of your amplifier can be connected to the line-level inputs on
the AE108². The line level outputs on the AE108² are then connected back to the
power amp (main) inputs on your amplifier.
Using two AE108² subwoofers
When using two AE108² subwoofers use the Line Level output connectors from the
main subwoofer to the Line Level input connectors on the second subwoofer.
