23
7.
APPENDIX:
n
Q & A
Q : Why the “Init DLL…" error message is shown at rebooting into
Windows9x after the installation the application of TV/FM Capture card
¡ H
A
¡ G
It means that the hardware of TV/FM Capture card can not be detected with the
Application program. So Please use soft eraser to erase the gold fingers to solve such
problem.
Q
¡ G
Why my TV/FM Capture card provided with no sound?
¡ @
A
¡ G
Please see to the short cap on the 5-6/7-8 of JP1. If no, it may bring you to no sound.
¡ @
Q
¡ G
Why remote control is not working properly?
A
¡ G
It might because of the inferior connecting. Please re-setup again of the receiver or
check the battery is fixed.
¡ @
Q
¡ G
Why the picture quality is not good during replaying after retrieving those captured
motions?
¡ @
A
¡ G
¡@
It might because the improper video setting does not go with the executing captured
motion compression ratio. Please do the minor adjustment of the setting program. It
will be definitely solved.
(There is minor difference during the capturing in the different working environment.
Adjust the setting is required for better effect.)
Q:I've performed Autoscan on OSD remote controller but no channel or only
few channels can be tuned ?
A:Probably the built-in frequency tables are not complete.You can use
Manual Scanning function to search all possible frequencies.
If you don't know how to use the Manual Scanning tool,You can simply
click Auto Scan-Add button on Manual Scanning tool dialog and it will
automatically search most tuned channels and add them on your program
lists(cable,air)for you. This operation will take about 5 to 10 minutes.
See On-Line help about Manual Scanning for more information.
Q:Image qualities on some programs are not good ?
A:You can use finetune function by clicking "Func" on remote controll
to get acceptable image quilities.
Q: Why I can't perform the Overlay Mode ?
