ADSL Router
User’s Manual
(
с) ACORP 2008
Revision 2.0
Page 55 of 58
4.5 1483 Routed Mode
1. Open the WEB page at “WAN /Channel Config”.
2. Select the Channel Mode to “1483 Routed”. Set the parameters VPI/VCI and
Encapsulation mode according to the CO DSLAM’s setting.
3. In WAN IP settings, give the local and remote IP address from your ISP or use
DHCP to get them automatically if your ISP support it. Local IP is the address of
ADSL router. Remote IP is the ISP’s gateway address.
4. Click “Add” button to add this channel.
5. Open the WEB page at “Admin/ Commit/Reboot”. Press “Commit” to save the
settings into flash memory.
6. The new settings will take effect after reboot the system.
