4-75
Chapter 4 Install 4845GVQ to Cabinet
Barebone Q4-2 is the cabinet dedicated for system of
Motherboard 4845GVQ. To install main peripherals with
4845GVQ in the cabinet Barebone Q4-2, please follow the
principal procedures illustrated below:
Chapter 4
Cabinet - Barebone Q4-2
4. Install Peripherals into Cabinet
1. Open the cabinet (Barebone Q4-2) of 4845GVQ
2. Remove the FDD Bay-panel and HDD Bay-panel
3. Remove the HDD Bay .
4. Connect Power Cord to on-board Power Connector
5. Connect IDE/FDD Cable to on-board connector
6. Install RAM Modules to Memory Slots
7. Install CPU and then CPU Fan
8. Install Floppy Disk Drive to Bay
9. Install CD-ROM to Bay
10. Connect Audio Cable to CD-In1 and CD-ROM
11. Install Hard Disk Drive
12. Install System Fan
13. Close the Cabinet
1. Open the Cabinet (Q4-2) by removing the three screws with a screw-
driver.
Barebone Q4-2
Summary of Contents for 4845GVQ
