induction, a very wide scope far outweighing the 50 ° angle of
the camera lens. When game first crosses the PIR area of the
prep sensor, the camera is activated and ready to shoot after 1
second. If the game continually enters into the PIR area of the
main sensor, the camera takes pictures immediately, therefore
catching the whole body of the game. This split-second
process could be as short as 0.2 second.
In the case the game browses only in the PIR area of the prep
sensors, to avoid the camera being powered on constantly, the
system is designed to work in the following way: If the game
does not enter the PIR area of the main sensor and therefore
not trigger the main sensor, the camera will power off after 3
seconds. If the trigger events consecutively happened twice
only in the PIR area of the prep sensors, the camera will not be
activated by the side prep sensors, but only by the main sensor.
So later on when the game enters the PIR area of the main
sensor eventually, since it is not in fast movement, the picture
will by all means capture the whole body of the game based on
our standard 0.6 second response time.
- 14 -
Summary of Contents for Ltl-5310 Series
Page 1: ...Ltl Acorn Mobile Scouting Camera Ltl 5310 Series SMS remote control 720P video USER S MANUAL...
Page 8: ...Figure 1 1 Front View of Ltl 5310M Figure 1 2 Bottom View of Ltl 5310M 5...
Page 26: ...Click on Camera Setup and you will see the following interface 23...
Page 58: ...Appendix III INSTRUCTION ON INSTALLING BATTERY BOX 55...