5
1) Remove the ‘R’ pin and Cross pin
from the downrod.
Install the
canopy and housing cover through
the downrod then thread the wires
through the downrod, insert the
downrod into the connector. (fig 3).
2) Loosen the two setscrews in the
downrod support. Install back the
Cross pin and secured with the ‘R’
pin. The ‘R’ pin must be properly
installed to prevent the Cross pin
from working loose. (fig 4)
INSTALLATION OF DOWNROD / HANGER BALL:
fig 7
fig 6
Summary of Contents for DC-160
Page 4: ...FAN STRUCTURE DRAWING 3...
