www.acorneng.com
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
EYE/FACEWASH
1.800.591.9360
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER
TECHNICAL ASSISTANCE FAX: 1.626.855.4894
UNITED STATES OF AMERICA
CITY OF INDUSTRY, CA 91744-0527
ACORN SAFETY
P.O. BOX 3527
Models S0950-LH / S0950-RH / S0960-LH / S0960-RH/
S0950-LH-AS / S0950-AS / S0960-LH-AS / S0960-RH-AS
Manual #7109-402-001
Revised: 08/16/19
Acorn Safety
a division of Acorn Engineering Company™
2. Please read this entire booklet before beginning the installation.
This warranty does not cover installation or labor charges and does not apply to materials, which have been
damaged by other causes such as mishandling or improper care or abnormal use. The repair or replacement of the
defective materials shall constitute the sole remedy of the Buyer and the sole remedy of Acorn under this warranty.
Acorn shall not be liable under any circumstances for incidental, consequential or direct charges caused by defects in
materials, or any delay in the repair or replacement thereof. This warranty is in lieu of all other warranties expressed
or implied. Product maintenance instructions are issued with each unit and disregard or non-compliance with these
instructions will constitute an abnormal use condition and void the warranty. Stainless steel must be protected on job
sites during construction and must be properly maintained after the water has been introduced into the safety product
or Acorn's warranty is void.
Acorn Safety warrants that its products are free from defects in material or workmanship under normal use and
service for a period of one year from date of shipment or 18 months after the date of shipment from factory ,
whichever comes first. Acorn's liability under this warranty shall be discharged solely by replacement of repair of
defective material, provided Acorn is notified in writing within one year from date of shipment, F.O.B. Industry,
California.
LIMITED WARRANTY
1. Please leave this documentation with the owner of the fixture when finished.
NOTES TO THE INSTALLER:
3. Check your installation for compliance with plumbing, electrical, ANSI Z358.1 and
other applicable codes.
UNITED STATES AND CANADA
