We suggest charging the refrigerator battery to full using AC adapter before you
leave for a trip or outdoor activity.
If the fridge has not been in use for a long time the battery may have over
discharged and unit will not power on. Please use AC adapter to charge unit to
working mode. After unit has received up to 30% charge other charging
methods may be used.
Car Port Charging Management
Engine Turned-on: You can choose anyone of H, M or L mode (see Battery
Production in Chapter 5) and use car port power to operate the freezer.
Different cars may have different power output voltages. If the voltage
protection causes F1 error showed in the LCD, just set the battery protection
from H to M or L. If the F1 error is still present, please charge the unit with the
adapter for few minutes and normal operation will resume.
Engine Turned-off: Charging using car battery: Most cars will stop power supply
if engine is stopped, but some cars will continue power supply even when
engine is stopped. You should adjust the battery protection to H, otherwise, the
power of your car battery may run out and it may not have enough power to
start car. You can also unplug the car port charger and run the fridge/freezer
using its internal battery. If you don’t want to use car battery it is recommended
to disconnect the car charger from the fridge and set Battery Protection to L
mode. This will allow the refrigerator battery to work for a longer time in a safe
and independent condition.
reaches 12.6V and the battery icon stops flashing, the unit has been fully
charged and wiring should be disconnected to prevent internal component
damage.
oWarning!!: Do not charge fridge/freezer with DC12V and Solar Panel at the
same time! The unit may be seriously damaged and pose a potential hazard
to you.
AC Charging Management
AC charging is always the first choice if AC power supply is available. Check
6
o
o
o
o
•
•
o
