ACONATIC 32HD513AN, Manual

Page: 27 / 28

LED COLOR TV
13
Do you want to skip ATV tuning?
Yes
No
Do you want to exit tuning?
Yes
No
Note:
When the automatic tuning does not find any receivable channel (e.g. due to poor
antenna) or you interrupted the tuning manually, you can still tune channels manually,
one by one, in the device menu described below. For this you will need some
technical information about the broadcast that you want to receive, e.g. the method of
transmission, of the channels frequency, sound modes, the transmission speed etc.
A successful completion of the automatic tuning results in saving of the list of the available
TV programs and radio stations, which you can receive immediately. In the case of
multiple occurrences of the same or similar programs (e.g. due to local variations of the
same central program or a remote reception with interference or local reception “clean”
reception) verify, which station works best for you or modify the list.
Automatic satellite tuning is adapted to tune one satellite antenna with a single LNB and
corresponds to the setting DiSEqC = None / None. If your antenna is complicated, specify
the antenna parameters (especially control LNB DiSEqC commands) by setting that the
installer of your antenna system tells you. Enter these data in the Satellite setting/Dish
Setup, described in the next section.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator Inc. in the
United States and other countries.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the double-D
symbol are trademarks of Dolby Laboratories.