Acomdata PDHD1000UFSE, Quick Start Manual

Page: 4 / 21

3
PreCautions
Please follow the precautions below. Failure to so do may result in device damage,
data loss, and voiding of the warranty.
We strongly recommend you backup your data. AcomData is not responsible for data •
loss or corruption; nor will AcomData perform data recovery.
Do not attempt to open, disassemble, or modify the device.
•
Do not expose the device to damp or wet conditions. •
Never place containers of liquids on the device. This can damage the device and •
increase the risk of electric shock, short-circuiting, fire, or personal injury.
If the device has a three-prong plug, never plug it into a two-prong outlet.
•
Do not expose this device to temperatures outside the range of 5°C to 35°C when the •
device is in operation, and -20ºC to 60ºC when not in operation.
Do not use a third-party AC adapter or power cord.
•
Do not bump, jar or drop the device. •
Do not stand the device in a way not described in this guide. •
Data cables can only be plugged in one way. Be sure to orient them correctly. •
Do not disconnect any cables while the device is mounted to your operating system. •
Do not use more than one interface (e.g. USB 2.0, eSATA, FireWire) at a time. •
You can use both FireWire/FireWire ports (if so equipped) simultaneously—one port •
to connect the Drive to your computer; the other port to connect to another FireWire
device. However, do NOT connect a bus-powered FireWire device to the Drive.
Do not connect the device to more than one computer at a time.
•