Connecting the DrivePod
to Your Computer
Regardless of which operating sys-
tem (OS) your computer is running,
follow the connection procedure
below in order to properly connect
the USB cable, and the AC adapter
and power cord. Then proceed to
the correct installation procedure
for your computer.
1. Plug the AC adapter cord into the Power Port on the back of the DrivePod.
Plug the power cord into the recessed cord socket in the AC adapter, and
then plug the other end into a standard outlet.
2. Each end of the USB cable has different shaped plugs. One plug matches
the USB port on your computer; the other plug matches the USB port on the
DrivePod. Plug the correct end of the USB cable into a USB port on the com-
puter; then plug the other end into the USB port on the back of the drive.
Make sure you connect the USB cable correctly, otherwise it may damage
the drive and void the warranty.
3. If you connected the DrivePod with the computer turned off, turn on the
computer. When your computer is completely booted up, press the Power
Button located on the front of the drive to turn it on.
2. While keeping the mouse button pressed down, drag the highlighted file or
folder to the DrivePod or to a specific folder on the drive.
3. Release the mouse button. The file or folder will copy over.
34
USB cable
DrivePod
AC adapter
& power cord
FIGURE 1
11
Summary of Contents for DRIVEPOD
Page 2: ......
