Please Read instructions fully prior to assembly
•
These products may represent a potential shock or fire hazard if
improperly installed. Products should be installed in accordance with
these instructions and current electrical codes
•
To avoid electrical shock, disconnect or disable power at the source
prior to installation or maintenance.
•
To avoid electrical shock, use only with 12v or 24v DC hardwire or
plug in power supply. Factory warranty will be void if used otherwise
•
To avoid product failure, pair the correct voltage power supply to
the correct voltage of the Ribbonlyte e.g., 24v Ribbonlyte with a 24v
power supply. Factory warranty will be void if used otherwise
•
Do not
use if there is any damage to the Ribbonlyte or to the power
Cord
’
s insulation. Inspect periodically.
•
Ensure proper gauge wires are installed between Power Supplies,
Controls & Ribbonlyte to avoid voltage drop. (
Please refer to cable chart)
Summary of Contents for EH50
Page 1: ...EH50 Pendant Installation manual ...
Page 5: ......