ACOEM Met One Instruments GAS-1060, User Manual

Page: 76 / 164

Serinus 60 User Manual 3.0
Page 76
6. Click Acquire Configuration . This will probe the instrument for a channel list. After a few seconds,
the channel list should be visible in the Channels tab.
Figure 27 – Station Configuration
Note: If there was an error connecting to the instrument, a red dot will appear next to the station
name in the station list (on the far left hand side). Hovering over the red dot will present you with an
error message (refer to Figure 28).
Figure 28 – Error Status Notification
7. Select the Data Manager tab, click download. The Download Data window will appear. Select the
appropriate time period that you wish to download and click Download.