Operating Instructions DMMS_DIGISYS
ACO A
utomation
Co
mponents
26
DIGISYS evaluation and transmission module
7.2.1.
Operating type switch functions
Operation mode switch (2)
Function
From the middle to the upper
position
Activate program processing (RUN)
From the upper to the middle
position
Stop program processing (STOP)
Lower position
Not required for users.
Press down (i.e. using a
screwdriver)
Hardware-Reset
All outputs and flags are reset; Variables are set to 0 or to FALSE or to an
initial value. The Hardware - Reset can be initiated with STOP, as well as
with RUN in each position of the operation mode switch!
A change in operation mode occurs internally at the end of a PFC-cycle.
