Acnodes PC 2150, User Manual

Page: 25 / 37

PC 2150 15.0” All-in-One PANEL PC User’s Manual
System Installation
19
3.4 Parallel Port
The printer interface is a 25-pin D-SUB connector. To connect any
parallel device, just plug in the device connector to the 25-pin D-SUB.
3.5 VGA
The PC 2150 has an analog RGB interface connector. It is
able to connect to an expansion CRT monitor, and the system can
display on both the flat panel and the CRT simultaneously.
3.6 Ethernet
The PC 2150 provides an NE2000 compatible Ethernet
(RJ-45) interface. For network connection, just plug in one cable end
of the PC 2150 100-Base-T Hub into the standard RJ-45
connector. The pin assignment of the RJ-45 is listed below;
RJ-45 Connector Pin Assignment
Pin Description
RJ-45
1 2 3 4 5 6 7 8
1
2
3
6
others
Tx+ (Data transmission positive)
Tx- (Data transmission negative)
Rx+(Data reception positive)
Rx- (Data reception negative)
Not use