go! stick
Quick Start Guide
STEP
Plug the go! stick USB modem into the USB port of your Mac.
•
STEP
Follow the prompts to install the software.
NOTE:
When a dialogue box prompts you to enter the SP code, type in
“broadband”, then click OK.
•
STEP
Click the Connect button to connect to the Internet.
•
For detailed instructions and trouble-shooting,
refer to the PDF document
“Mobile Connect User Manual for MAC OS X” stored on the device.
Alternatively, this document is also available at www.acnaustralia.com.au
Mac installation
Further information
For information on additional features and FAQs you may wish to refer to
the manufacturer user guide. This can be found by selecting Help in the
Modem Manager Interface and then Online Help. Alternatively the guide is
available at www.acnaustralia.com.au.
Troubleshooting
If the modem fails to connect, this may be because the USB port on the
computer is providing insufficient power. In this case, try connecting the
USB cable to the modem and your computer to draw additional current.
