axis gear and motor gear.
6.
Plug all the connect wires back upon the belt.
7.
Tighten all the screws.
F. If The tilt belt is broken
1.
Turn off the mains power.
2.
Loosen all the screws (A) and open the right arm cover (B).
3.
Loosen the screws (C) that fix the bridge.
4.
Change a new belt (D). Please adjust the tension of the belt properly. Note: do not fix the belt
too tight as it is can easily rupture.
5.
Reverse the procedures from step 3 to 2.
8. Maintenance and Cleaning
Maintenance:
Ballast
26