7.3 DMX Address Setting
By using a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the
MENU
button up to when the
DMX Address
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address. Once
the address has been selected, press and keep
ENTER
button pressed up to when the display stops
blinking or storing automatically 8 seconds later. To go back to the functions without any change
press the
MENU
button again. If you use please refer to the following diagram to address your
DMX512 channel for the first 4 units
：
15 CHANNEL MODE:
21 CHANNEL MODE:
7.4 DMX Control
15 Channels
(Mode 1):
Channel
Value
Function
1
000 - 255
PAN
0 °
540°
2
000 - 255
TILT
0 °
270°
3
000 - 255
PAN/TILT SPEED
：
Fast
Slow
4
000-069
070-079
080-089
090-099
100-109
110-119
120-129
130-139
140-149
150-159
160-169
170-179
SPECIAL FUNCTION:
Null
Blackout while pan/tilt move enable
Blackout while pan/tilt move disable
Blackout while color change enable
Blackout while color change disable
Blackout while gobo change enable
Blackout while gobo change disable
Lamp on
Pan/tilt reset
Color reset
Gobo reset
Shutter reset
A
19A
