8B
DMX Setting
Select the
DMX Setting
, press the
ENTER
button and the display will blink. Use the
DOWN
and
UP
button to change the DMX 512 address
（
001-512
）
or Elthernet Setup,In Elthernet Setup menu,fixture
Elthernet
parameter ,IP Address/Subnet Mask/Net(0-127)/Subnet(0-15)/Universe(0-15)
,
Must be
consistent with the value of the controller
，
Fixture receives the corresponding ArtNet signal control.
Once the address has been selected, press the
ENTER
button to setup or exit menu mode without any
change after 8 seconds automatically. Back to the previous functions without any change press the
MENU
button.
Channel Mode
Select the
Channel Mode
, press the
ENTER
button. Use the
DOWN
and
UP
button to select the
Channel,
there are 13 channel Modes. Once selected, press the
ENTER
button to store. Press the
MENU
button
back to the last menu without any change or idling 1 minute to exit menu mode.
DMX Last State
Select the
DMX Last State
, press the
ENTER
button. Use the
DOWN
and
UP
button to select
Blackout
or
Hold
. Once selected, press the
ENTER
button to store. Press the
MENU
button back to the last menu
without any change or idling 8 seconds to exit menu mode.
Dimmer curve
Select the
Dimmer curve
, press the
ENTER
button. Use the
DOWN
and
UP
button to select the curve you
need. Once selected, press the
ENTER
button to setup or exit menu mode without any change after 8
seconds. Back to the functions without any change press the
MENU
button again.
Dimmer mode 1 Dimmer mode 2 Dimmer mode 3 Dimmer mode 4
Summary of Contents for Thunderstruck LP-2304
