ACME Thunderbreaker, User Manual

Page: 13 / 52

the last received DMX signal.
Manual: When the DMX signal is disconnected, the device runs in manual mode.
The internet
Select the The internet and press the ENTER button to confirm. The current mode
will be displayed on the display. Use the UP/DOWN buttons to select: IP address or
submask code. Select the IP address and press the ENTER button to confirm. The
display will show XXXX. XXX.XXX.XXX , press the MENU button to exit. Select the
sub-mask code, press the ENTER button to confirm, the display will show
XXXX.XXX.XXX.XXX, press the MENU button to exit. Press the MENU button to
return to the previous menu or wait one minute to automatically exit the network
mode
Pixel settings
Select the pixel setting , press ENTER button to confirm, use UP/DOWN button to
select Ethernet setting, press ENTER button to confirm, use UP/DOWN button to
select:
Net.Universe.Add
, 1.xxx.xxx.xxx.xxx Or 2.xxx.xxx.xxx.xxx, after selecting the
desired mode, press the ENTER button to set and save. Press the MENU button to
return, or wait one minute to return to the main menu.
Device Settings
Enter the MENU mode, select the Device Settings , press the ENTER button to
confirm, and use the UP/DOWN buttons to select: Dimming Curve, Dimming Speed
or White Balance.
16 A
12
C