Square Law: Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels.
Linear: The increase in light intensity appears to be linear as DMX value is increased.
S-Curve: Light intensity control is finger at low levels and high levels and coarser at medium levels.
Pri./Sec. Mode
Select Pri./Sec. Mode, press the ENTER button to confirm. Use the UP/DOWN button to select
Primary or Secondary. Once selected, press the ENTER button to save. Hold and press the MENU
button about one second or wait for 30 seconds to exit the menu mode.
DMX Last State
Select DMX Last State, press the ENTER button to confirm. Use the UP/DOWN button to select
Pri.Sec., Blackout or Hold. Once selected, press the ENTER button to save. Hold and press the
MENU button about one second or wait for 30 seconds to exit the menu mode.
Display Setting
Select Display Setting, press ENTER button to confirm. Use the UP/DOWN button to select
Contrast Ratio, Backlight Auto Off, Invert Display or Language.
Contrast Ratio
Select Contrast Ratio, press the ENTER button to confirm. Use the UP/DOWN button to adjust
value from 1 to 30, press the ENTER button to save. Press the MENU button back to the last menu
or let the unit idle 30 seconds to exit menu mode.
Backlight Auto Off
Select Backlight Auto Off, press the ENTER button to confirm. Use the UP/DOWN button to select
No(display always on) or Yes(display goes off 30 seconds after exiting menu mode), press the
ENTER button to save. Press the MENU button back to the last menu or let the unit idle 30
seconds to exit menu mode.
10L
