Tilt Inverse
To select
Tilt Inverse
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
No
(normal) or
Yes
(tilt inverse), press the
ENTER
button to store. Press the
MENU
button back to the
last menu or let the unit idle 30 seconds to exit menu mode.
P/T Feedback
To select
P/T Feedback
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
No
(Pan or tilt’s position will not feedback while out of step) or
Yes
(Feedback while pan/tilt out of step),
press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle
30 seconds to exit menu mode.
Dimmer Speed
To select
Dimmer Speed
, press the
ENTER
button to confirm. Use the
DOWN
/
UP
button to select
Fast
or
Smooth
, press the
ENTER
button to store. Press the
MENU
button back to the last menu or
let the unit idle 30 seconds to exit menu mode.
Dimmer Curve
To select
Dimmer Curve
, press the
ENTER
button to confirm. Use the
DOWN
/
UP
button to select
Square, Inverse Square, Linear
or
S Curve
, press the
ENTER
button to store. Press the
MENU
button
back to the last menu or let the unit idle 30 seconds to exit menu mode.
Optically Linear:
The increase in light intensity appears to be linear as DMX value is increased.
Square Law:
Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law:
Light intensity control is coarser at low levels and finger at high levels.
S-Curve:
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Focus Compensate
To select
Focus Compensate
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to
select
Disable, Near, Medium
or
Far
, press the
ENTER
button to store. Press the
MENU
button back
to the last menu or let the unit idle 30 seconds to exit menu mode.
11M
