ACME Super Dotline, User Manual

Page: 28 / 100

- 27 -
Error Logs
Reset Function
Enter the control menu and select Reset Function, press ENTER. Use the UP/DOWN button
to select Tilt Reset, Effect Reset or All Reset.
Tilt Reset
Effect Reset
Select Effect Reset, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset effect to their home positions), confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Tilt Reset, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset tilt to its home positions), confirm your selection with
ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Error Logs, press ENTER.
Use UP/DOWN button to select Fixture Errors, confirm your selection
with ENTER.
The error list is displayed.
Use UP/DOWN button to select Reset Error Log, confirm your selection
with ENTER.
If you wish to reset the relevant error logs, select Yes. If you do not wish
to reset anything, select No. Confirm your selection with ENTER.
If you select Yes, use UP/DOWN button to set the password 050,
confirm your selection with ENTER. The relevant error logs are reset.
To exit the menu, press MENU, or wait 30 seconds.