ACME STAGE PAR 400 ZOOM IP, User Manual, Page: 9 / 24

DMX Setting
To select DMX Setting, press the ENTER button to confirm, use the UP/DOWN button to select
DMX Address or Channel Mode.
DMX Address
To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust
the address from 001 to 512, press the ENTER button to store. Press the MENU button back to the
last menu or let the unit idle 30 seconds to exit menu mode.
Channel Mode
To select Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to select 5
CH, 7 CH or 9 CH, press the ENTER button to store. Press the MENU button back to the last menu
or let the unit idle 30 seconds to exit menu mode.
DMX State
To select DMX State, press the ENTER button to confirm, use the UP/DOWN button to select Last
State, Blackout or Show.
Fixture Setting
To select Fixture Setting, press the ENTER button to confirm, use the UP/DOWN button to select
Primary/Secondary, Light Mode, Constant Color, Dimmer Curve, Dimmer Speed, Fan Mode or
PWM Frequency.
Primary/Secondary
To select Primary/Secondary, press the ENTER button to confirm. Use the UP/DOWN button to
select Primary or Secondary, press the ENTER button to store. Press the MENU button back to the
last menu or let the unit idle 30 seconds to exit menu mode.
Light Mode
To select Light Mode, press the ENTER button to confirm. Use the UP/DOWN button to select
Color Correction or White Balance, press the ENTER button to store. Press the MENU button back
to the last menu or let the unit idle 30 seconds to exit menu mode.
8G