6A
Button:
11. MENU
To select the programming functions
12. DOWN To go backward in the selected functions
13. UP
To go forward in the selected functions
14. ENTER
To confirm the selected functions
3.2 Main Functions
To select any of the given functions, press the MENU button up to when the required one is
showing on the display. Select the function by ENTER button and the display will blink. Use
DOWN and UP button to change the mode. Once the required mode has been selected,
press the ENTER button to setup, to go back to the functions without any change press the
MENU button again. Hold and press the MENU button about one second or wait for one
minute to exit the menu mode.
The main functions are showing below:
